[4,5,6 Digits] All Onn Universal Remote Codes Available Here

Universal remotes have revolutionized the way we control multiple entertainment devices with ease. Among the popular budget-friendly and efficient options, Onn universal remotes stand out for their simplicity and compatibility across numerous brands. However, unlocking their full potential depends on understanding and using the right Onn universal remote codes.

This comprehensive guide dives deep into everything you need to know about Onn universal remote codes — from finding the right codes and programming your remote, to troubleshooting common issues. Whether you’re new to universal remotes or looking to optimize your current setup, this article will serve as your authoritative resource.

What Is an Onn Universal Remote?

Onn is a Walmart-exclusive electronics brand known for affordable, reliable tech accessories, including universal remote controls. Onn universal remote can operate multiple devices—TVs, DVD players, sound systems—from various brands using a single remote, eliminating the need for clutter and hassle.

Unlike brand-specific remotes, universal remotes rely on remote codes, sequences of numbers that tell the remote how to communicate with each device brand.

Why Choose an Onn Universal Remote?

• Budget-friendly with solid compatibility
• Easy-to-use design for everyday users
• Supports popular TV brands (Samsung, LG, Vizio, Sony, TCL, and more)
• Enables control over multiple devices with one remote

Read Also: Philips Universal Remote Codes

Understanding Universal Remote Codes

Before programming your Onn universal remote, it’s crucial to grasp what universal remote codes are.

What Are Universal Remote Codes?

Universal remote codes are numeric sequences that correspond to specific brands and device models. These codes allow your remote to mimic the commands of the original remote control of your device. Each manufacturer has a set of codes, sometimes multiple codes, which ensure your universal remote can send the correct signals.

How Do Remote Codes Work?

When you enter a remote code, you’re essentially programming your remote to “speak the language” of your device. The remote then sends the right infrared (IR) signals for functions such as power, volume, channel changes, and more.

Types of Remote Codes

• Manufacturer-specific codes: Codes that match specific brands (e.g., Samsung: 10060, LG: 10702)
• Generic codes: Broad codes that work with multiple brands but might have limited functionality
• Auto-search codes: The remote cycles through codes automatically until the device responds

How to Find Onn Universal Remote Codes

Finding the correct remote code is key to programming your remote successfully.

1. Check the Onn Universal Remote Manual

The most reliable source is your remote’s user manual. Most manuals include a list of codes for popular brands.

2. Use Official Online Databases

Walmart and Onn product support pages often provide code lists for universal remotes. Walmart’s Onn Support is a good starting point.

3. Search Online Code Repositories

Several websites maintain updated databases of universal remote codes, such as:

• RemoteCodes.org
• UniversalRemoteCodes.com

4. Use Auto-Code Search Function

If you can’t find your device’s code, the Onn universal remote supports a code search or auto-programming mode that scans for compatible codes automatically.

Programming Your Onn Universal Remote: Step-by-Step Guide

Here is a detailed process to program your Onn universal remote using codes.

Step 1: Prepare Your Devices

• Turn on the device you want to program (TV, DVD, etc.)
• Ensure the remote has fresh batteries and is within 5-10 feet of the device

Step 2: Enter Programming Mode

1. Press and hold the Setup button on the Onn remote until the LED light blinks twice.
2. Release the Setup button.

Step 3: Input the Device Code

1. Press the device button (e.g., TV, DVD) on the remote.
2. Enter the 3, 4, or 5-digit code corresponding to your device brand.
3. The LED light will blink twice to confirm the code entry.

Step 4: Test the Remote

• Aim the remote at the device and press the Power button.
• If the device turns off/on, programming is successful.
• If not, repeat the process with the next code on the list.

Step 5: Auto-Search Mode (If Codes Don’t Work)

1. Press and hold Setup until LED blinks twice.
2. Press the device button.
3. Press Power repeatedly until the device responds.
4. Once it responds, press Setup to lock the code.

Complete List of Onn Universal Remote Codes for Popular Brands

Here is a list of tested Onn universal remote codes for the most common TV brands:

Note: Some devices may require multiple codes to work fully. Refer to your manual or online resources for the complete list.

Troubleshooting Common Onn Remote Code Issues

Even with the right code, you might face problems. Here’s how to fix them.

Problem 1: Remote Not Controlling Device

• Ensure you entered the code correctly.
• Try alternate codes for your brand.
• Confirm batteries are fresh and inserted properly.
• Make sure there is no obstruction between the remote and device.

Problem 2: Codes Are Not Accepted

• Reset the remote and try again.
• Use auto-search method if manual entry fails.

Problem 3: Partial Functionality (e.g., volume works but power doesn’t)

• Try different codes for the same brand.
• Check if your device has special IR requirements or uses Bluetooth (universal remotes usually work only with IR).

Tips for Successful Onn Universal Remote Programming

• Use fresh batteries: Weak batteries often cause intermittent or failed programming.
• Stay within line of sight: Point the remote directly at the device sensor.
• Be patient: Sometimes it takes multiple attempts or codes to find the perfect match.
• Document codes: Keep a list of working codes for future reference.
• Avoid mixing codes: Reset before programming a different device.

Read Also: FuboTV on LG Smart TV

How to Reset Your Onn Universal Remote

If your remote isn’t responding or you want to start fresh, resetting is simple.

Reset Instructions

1. Press and hold the Setup button until the LED blinks twice.
2. Enter the code 9-8-1 (factory reset code).
3. The LED will blink four times confirming the reset.
4. Reprogram your devices following the earlier steps.

Alternative Ways to Control Your Devices

If remote codes aren’t working or you want added convenience, consider these options:

• HDMI-CEC: Enables control of multiple HDMI-connected devices with one remote via TV settings.
• Device manufacturer apps: Many TVs and devices have official apps for smartphones that control devices via Wi-Fi or Bluetooth.
• Voice assistants: Amazon Alexa, Google Assistant, and Apple HomeKit can control compatible devices via voice.

Onn Universal Remote Codes FAQs

Q1: What if my device brand is not listed in the code list?

A: Use the auto-search function on your remote to scan all possible codes. Alternatively, check updated online code databases regularly.

Q2: Can I program multiple devices with one Onn remote?

A: Yes, Onn remotes can control multiple devices such as TV, DVD players, and audio systems by programming each device separately.

Q3: How many devices can one Onn universal remote control?

A: Typically, up to three or four devices, depending on the model.

Q4: What if I lost the original remote code list?

A: You can find code lists online, in the Onn support section on Walmart’s website, or via universal remote code websites.

Q5: Does Onn universal remote work with non-Onn devices?

A: Yes, that’s the purpose of a universal remote—to control devices from many brands.

Q6: How do I update Onn remote codes when new devices come out?

A: Onn remotes do not support firmware updates, but you can use the auto-search function or check new code lists online.

Conclusion

Mastering your Onn universal remote codes transforms your entertainment experience by giving you seamless control over multiple devices with one handy remote. Whether you use manual code entry or auto-search, this guide equips you to find, program, and troubleshoot your Onn remote effectively.

For the latest codes and updates, regularly check Walmart’s official Onn remote support pages and trusted universal remote code databases. With patience and the right knowledge, your universal remote will serve as the central command for your home entertainment.